Victron Lynx Shunt VE. Can

Lynx Shunt VE. Can The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built in battery monitor accurately monitors the state of charge of your battery.  The Lynx shunt contains a positive bus-bar with space...

Victron Lynx Distributor

Lynx DistributorA modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.  Contains a positive and negative bus-bar...

Victron Lynx Power-In

Lynx Power-InThe lynx power in module is used to connect batteries via an external fuse. It can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is suggested to use an...

Samlex 400A Class T Fuse Block Accessory Kit

400A Class T Fuse Block Accessory KitSpecifications:Amps: 400 AmpsFuse: 400 AmpsWeight: 1 (lbs)Weight: 0.45 (kg)Dimensions: 7 x 2 x 2.25 (in)Dimensions: 17.8 x 5.1 x 5.7 (cm)Applications:Inverter AccessoriesWARNING: This product can expose you to...

Blue Sea 5032 ST-Blade Split Bus Fuse Block

ST-Blade Split Bus Fuse BlockFeatures: Provides two isolated groups of six ATO/ATC circuits For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits Screw terminals for securing wires accept...

Blue Sea 5194 MRBF Surface Mount 3 Circuit Fuse Block - Independent Source

Surface Mount 3 Circuit Fuse Block - Independent SourceSurface mount fuse blocks accommodate three MRBF fuses for consolidated high amperage circuit protectionThe independent source fuse block (5194) is ideal for 3 output battery chargersThe common...

Samlex 400A Class T Replacement Fuse

400A Class T Replacement FuseSpecifications:Individual FuseAmps: 400AFuse: 400AWeight: 0.2 (lbs)Weight: 0.09 (kg)Dimensions: 3 x 1.25 x 1.25 (in)Dimensions: 7.6 x 3.2 x 3.2 (cm)WARNING: This product can expose you to chemicals which are known to the...

Blue Sea 5502 Fuse Block Class T 225-400 Amp

Fuse Block Class T 225-400 AMPPart #: 5502Features:Maximum Voltage: 160 Volts DC Maximum Amperage: 400 Amperes DC Maximum Torque: 190 in-lb (21.47 Nm) max. Terminal Stud Size: 3/8"-16 (M10) Mounting Holes: Accept 1/4" (M6) Screw Maximum Cable Size 4/0...

VETUS Fuse Holder C100

Fuse Holder C100Fuse holder, type C100 including cover, suitable for fuses of 40 to 500 amp Product : VETUS FUSEHOLDER BOW THRUSTER C100 Manufacturer : VETUS Manufacturer Part No : ZEHC100 Product : VETUS FUSEHOLDER BOW THRUSTER C100

Blue Sea 5034 ST Blade Fuse Block w/out Cover - 12 Circuit w/out Negative Bus

5034ST Blade Fuse Block w/out Cover - 12 Circuit w/out Negative BusTin-plated copper buses and fuse clips give 30 Amperes rating per circuit Accepts ATO and ATC fast acting blade fuses WARNING: This product can expose you to chemicals including...

Blue Sea 5046 ST Blade Compact Fuse Blocks - 8 Circuits w/Cover

ST Blade Compact Fuse Blocks - 8 Circuits w/CoverProvides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space.Compact common source fuse blockAccepts ATO®...

Victron Busbar to Connect 6 Modular Holders

Busbar to Connect 6 Modular HoldersFeatures:Six position high current bus bar (1500 A)With two M10 input connections.Input current up to 2000 A.Recommended to parallel multiple high power Multi or Quattro inverter/chargersWarranty InfoWARNING: This...

Blue Sea 5015 ST Glass Fuse Block w/Negative Bus

5015 ST Glass Fuse Block with Negative Bus Features:Clear insulating cover with label recesses for accept Large Format LabelsCover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fusesTin-plated copper buses and...

Blue Sea 5116 200A Class T Fuse

5116 200A Class T FuseFeatures:Extremely fast short-circuit response20,000 Ampere Interrupt Capacity (AIC)UL listed to standard 248-15DC Tested to UL standard 198LWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Blue Sea 5115 Fuse A3T (Class T) 175A

5115 Fuse A3T (Class T) 175AFeatures:Extremely fast short-circuit response20,000 Ampere Interrupt Capacity (AIC)UL listed to standard 248-15DC Tested to UL standard 198LWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Blue Sea 5114 150A Class T Fuse

5114 150A Class T Fuse Features:Extremely fast short-circuit response20,000 Ampere Interrupt Capacity (AIC)UL listed to standard 248-15DC Tested to UL standard 198LWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Blue Sea 5113 125A Class T Fuse

5113 125A Class T Fuse Features:Extremely fast short-circuit response20,000 Ampere Interrupt Capacity (AIC)UL listed to standard 248-15DC Tested to UL standard 198LWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Blue Sea 5163 750A ANL Fuse

5163ANL Fuse750ASilver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea...

Blue Sea 5161 600A ANL Fuse

5161ANL Fuse600ASilver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea...

Sea-Dog Blade Style LED Indicator Fuse Block w/Negative Bus Bar - 12 Circuit

Blade Style LED Indicator Fuse Block with Negative Bus Bar - 12 CircuitNickel Plated Copper/Stainless Steel/Injection Molded ABS.Features:Red LED lights indicate when fuse is blown or missingUses ATO/ATC & ATM fuses 1A-30AMain line terminal rating is...

Blue Sea 5037 ST Blade Fuse Block w/o Cover - 6 Circuit Independent w/o Negative Bus

ST Blade Fuse Block w/o Cover - 6 Circuit w/o Negative BusPart# 5037Can be used for 24-hour circuitsFuse blocks with covers include 20 write-on circuit labelsTin-plated copper buses and fuse clipsAccepts ring or spade type terminalsAccepts ATO® and ATC®...

Blue Sea 5033 ST Blade Fuse Block w/out Cover - 6 Circuit w/out Negative Bus

5033ST Blade Fuse Block w/out Cover - 12 Circuit w/out Negative BusTin-plated copper buses and fuse clips give 30 Amperes rating per circuit Accepts ATO and ATC fast acting blade fuses WARNING: This product can expose you to chemicals including...

Blue Sea 5018 ST Glass Fuse Block w/out Negative Bus - 6 Circuit

5018 ST Glass Fuse Block without Negative Bus - 6 CircuitFeatures:Clear insulating cover with label recesses for accept Large Format LabelsCover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fusesTin-plated copper...

Victron Modular Fuse Holder f/MEGA Fuse

Modular Fuse Holder for MEGA FuseThe dovetail feature allows interlocking multiple fuse holders.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive...

Victron 6-Way Mega Fuse Holder w/Busbar - 500A

6-Way Mega Fuse Holder with Busbar - 500ASix-way fuse holder for Mega-fuse with busbar (500A)Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive...

Blue Sea 7721 Mega/AMG Safety Fuse Block

MEGA or AMG Fuse Safety Block Ignition protected for installation aboard gasoline or diesel powered boats Sealed cover protects fuses from the harsh marine environment Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow...

Blue Sea 7720 MIDI/AMI Safety Fuse Block

MIDI or AMI Safety Fuse Block Ignition protected for installation aboard gasoline or diesel powered boats Sealed cover protects fuses from the harsh marine environment Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow...

Samlex 200A Fuse Assembly

200A Fuse AssemblySamlex fuse assemblies and replacement fuses.Features:Individual FuseIncludes single pole fuse bar, fuse insulating cap and hardwareSpecifications:Amps: 200 AmpsFuse: 200 AmpsWeight: 0.2 (lbs)Weight: 0.09 (kg)Warranty: 2 Year...

Samlex 100A Fuse Assembly

100A Fuse AssemblySamlex fuse assemblies and replacement fuses.Features:Individual FuseIncludes single pole fuse bar, fuse insulating cap and hardwareSpecifications:Amps: 100 AmpsFuse: 100 AmpsWeight: 0.2 (lbs)Weight: 0.09 (kg)Warranty: 2 Year...

Blue Sea 5006100 MAXI Fuse Block - 30-80A

MAXI Fuse Block - 30-80AIgnition ProtectedReplaces Part Number 5006MAXI Range 30-80AAccepts wire 18-4 AWGVersatile wiring orientationsLabel RecessSpecifications:Maximum Amperage: 80AMaximum Voltage: 32V DCMounting: #10 ScrewsWire Size:18-4 AWGWARNING:...

Blue Sea 5005 ANL 35-300AMP Fuse Block w/Cover

5005 ANL 35-300AMP Fuse Block with CoverFeatures:Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any directionFor use on systems up to 32V DCLarge 5/16" - 18 studs accept 5/16" (M8) ring terminals, 14 AWG to 2/0 AWG...

Blue Sea 5137 500A ANL Fuse

5137ANL Fuse500AIgnition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC)...

Blue Sea 5136 400A ANL Fuse

5136ANL Fuse400AIgnition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC)...

Blue Sea 5133 ANL Fuse - 300AMP

5133 ANL Fuse - 300AMPFeatures:Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boatsSilver-plated connector blades for corrosion resistanceVisible indication of blown condition6,000 Ampere Interrupt Capacity...

Blue Sea 5191 Terminal Fuse Block 30-300AMP

Terminal Fuse BlackNew isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse-Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight...

Blue Sea 5068 MAXI In-Line Fuse Holder

MAXI® In-Line Fuse HolderFeatures: Supplied with #6 red lead wire, 5" length 32V DC Max. voltage rating 60A Max. fuse amperage Firewall mounting hole permits: Two or more holders to be mounted together Surface mount Cover comes with a removable strap...

Blue Sea 5023 ST-Blade Battery Terminal Mount Fuse Block

ST-Blade Battery Terminal Mount Fuse BlockFeatures: Easy to install 4 ATO/ATC fused circuits Mounts on the battery terminal stud Screw terminals for securing wires Four Nylon insulated ring terminals included Insulating cover included Accepts Small...

Blue Sea 5001 Fuse Block MEGA 100-300A w/Cover

5001 Fuse Block MEGA 100-300A with Cover Features:The most economical system for 100-300 Ampere fusingInsulating cover satisfies ABYC/USCG requirements and cover breakouts allow wire access in any directionFor use on systems up to 32V DC5/16" stud...

Victron MEGA Fuse - 400AMP - 32V (Package of 5 Pieces)

MEGA Fuse - 400AMP - 32V (Package of 5 Pieces)Victron MEGA fuses provide circuit protection for high amperage applications.Features:Quantity: Includes 5 Pieces400AMP32VWarranty InfoWARNING: This product can expose you to chemicals which are known to the...

Blue Sea 5124 80A ANL Fuse

5124ANL Fuse80AIgnition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies...

Blue Sea 5122 50A ANL Fuse

5122ANL Fuse50AIgnition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies...

Blue Sea 5165 40A ANL Fuse

5165ANL Fuse40AIgnition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies...

</