Accu-Steer HRP17-12 Hydraulic Reversing Pump Unit - 12 VDC

HRP17-12 Hydraulic Reversing Pump Unit 12 VDCThe Accu-Steer HRP Series pump sets are designed to interface hydraulic steering systems with autopilot and electric steering controls. The output flow from the pump set determines the speed of the rudder...

Accu-Steer HRP17-24 Hydraulic Reversing Pump Unit - 24 VDC

HRP17-24 Hydraulic Reversing Pump Unit 24 VDCThe Accu-Steer HRP Series pump sets are designed to interface hydraulic steering systems with autopilot and electric steering controls. The output flow from the pump set determines the speed of the rudder...

Accu-Steer KVR-6 Verado Kit w/6' Hoses

KVR-6 Verado Kit6' Hose & Fitting for Furuno & Accu-Steer HRP 11/17 Product : ACCU-STEER KVR-6 VERADO KIT W/ 6' HOSES Manufacturer : Accu-Steer Manufacturer Part No : KVR-6 Product : ACCU-STEER KVR-6 VERADO KIT W/ 6' HOSES

Actisense Engine Management Unit Analog - NMEA2000

Engine Management Unit Analog - NMEA2000Share engine information on the NMEA 2000® bus...The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000...

Actisense Micro 4-Way Instrument Drop

Micro 4-Way Instrument DropThe Actisense 4-way drop makes it easier to reach up to four devices with a single cable.Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece and individual cable is required for each one. This...

Actisense N2K Female/Female Gender Changer - 0.25M

N2K Female/Female Gender Changer - 0.25MUse between two cable connectors of the same type and gender. Overcomes the problem of connecting two devices or cables which have the same gender of connector on an NMEA 2000® backbone.Female to Female - 0.25M ...

Actisense NMEA0183 Data Combiner w/RS232

NMEA0183 Data Combiner w/RS232Flexible multiplexing w/preconfigured version for Autoswitching or AIS operation...The Actisense NDC-4 and NDC-4-USB allow up to five OPTO isolated NMEA 0183 sources to be multiplexed into a single stream*.Two flexible...

Actisense NMEA0183 to NMEA2000

NMEA0183 to NMEA2000Hook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-ISO is the standard option. With an opto-isolated input and ISO-Drive output for direct NMEA 0183 device bi-directional connection.The Actisense NGW-1...

Actisense NMEA0183 to NMEA2000 AIS Configured

NMEA0183 to NMEA2000 AIS ConfiguredHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-ISO-AIS is the NMEA 0183 AIS option. This is a pre-configured version of the standard NGW-1-ISO that enables the conversion of NMEA 0183...

Actisense NMEA0183 to NMEA2000 w/USB

NMEA0183 to NMEA2000 w/USBHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-USB is the NMEA 0183 chartplotter option. USB (1.1 and 2.0) interface for bi-dircetional connection to a PC.The Actisense NGW-1 NMEA 2000 Gateway...

Actisense NMEA0183 to SeaTalkNG Gateway

NMEA0183 to SeaTalkNG GatewayHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-STNG is the Raymarine SeaTalkNG option. This version enables users to convert NMEA 0183 data into SeaTalk NG and vice-versa, providing...

Actisense NMEA2000 to PC USB Connection

NMEA 2000® to PC InterfaceInterface your PC to the NMEA 2000 bus with a functional firewall gateway...NGT-1-USB is the standard option - USB interface for bi-directional connection to a PC.The Actisense NGT-1 is the only intelligent NMEA 2000 gateway...

Actisense Quick Network Block Central Connector

Quick Network Block Central ConnectorFault-free, NMEA 2000® backbone connections...The Actisense QNB-1 provides flexible alternatives to multiple connectors reducing the cost of an NMEA 2000 cable installation.QNB-1 is perfectly suited to areas of high...

Actisense Rib Starter Kit N2K

Rib Starter Kit N2KAn ideal solution for RIB users that wish to install an 2000® network.Installing small NMEA 2000 networks is quicker and easier than it’s ever been with the RIB Starter Kit (RSK) from Actisense.The equivalent of four T-pieces in a...

Actisense Small Boat 8 Way Self-Contained Boat Network N2K

A2K-SBN-2 Small Boat 8 Way Self-Contained Boat Network N2KInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.The equivalent of eight T-pieces in a single case provides...

Actisense Small Boat N2K Network Kit

Small Boat N2K Network KitInstalling compact sized NMEA2000® networks is now quicker and easier with the introduction of the Small Boat Network from Actisense. This "backbone in a box" is the equivalent of four T-pieces, two terminators and a power tap,...

Airmar 10-Conductor In-Line Cable Splice - IP67

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use...

Airmar 117WR-2 Transducer Hull Nut Wrench

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with:B117 B150 B744V B744VL B765C SS555 Product :...

Airmar 117WR-3 Double Handle Transducer Wrench

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

Airmar 117WR-4 Transducer Housing Wrench

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V)...

Airmar 164WR-1 Crows Foot Transducer Wrench

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Airmar 164WR-2 Transducer Hull Nut Wrench

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with:B164SS164SS264 Product : AIRMAR TRANSDUCER WRENCH B164...

Airmar 164WR-3 Double Handle Transducer Wrench

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

Airmar 175WR-4 Transducer Housing Wrench

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use...

Airmar 60WR-2 Transducer Hull Nut Wrench

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with:B60SS60 Product : AIRMAR TRANSDUCER WRENCH B60...

Airmar 60WR-4 Transducer Housing Wrench

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:B60SS60 ...

Airmar 75WR-1 Crows Foot Transducer Wrench

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Airmar 75WR-2 Transducer Hull Nut Wrench

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with:B75SS75 Product : AIRMAR TRANSDUCER WRENCH B75...

Airmar 75WR-3 Double Handle Transducer Wrench

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Airmar 75WR-4 Transducer Housing Wrench

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with:B75SS75 ...

Airmar B275C-LHW Bronze Thru-Hull - Low & High Wide Frequency - Requires Mix & Match Cable

B275C-LHW Bronze Thru-Hull - Low & High Wide FrequencyRequires Mix & Match CableGet more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers...

Airmar B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20º

B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20ºThe bronze B60-20º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives...

Airmar Deadrise Angle Finder - Accuracy of 1/2

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features:Quickly...

Airmar DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20

DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20°Function: Depth / Temperature, Material: Plastic, Fixed Tilt Angle: 20°Frequency: 235 kHz, Cone: 12°, Power: 100 Watts RMSConnector: 5-Pin NMEA 2000Features:Low-profile, retractable, thru-hull...

Airmar DT820BV-235-N2 235 kHz Low Profile Tilted Element Smart Sensor 20 Tilt Bronze NMEA 2000

Airmar DT820BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 20° Tilt Bronze NMEA 2000Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile,...

Airmar P66 Transom Mounting Bracket - 2004 & Up

Transom Mounting Bracket for P66 Transducer - 2004 & up Product : AIRMAR P66 TRANSOM MOUNTING BRACKET NEW STYLE (2004&NEWER) Manufacturer : Airmar Manufacturer Part No : 33-479-01 Product : AIRMAR P66 TRANSOM MOUNTING BRACKET NEW STYLE (2004&NEWER)

Airmar P79 In-Hull Transducer w/Humminbird #9 Plug - 7-Pin

P79 In-Hull Transducer w/Humminbird #9 Plug - 7-PinOur P79 in-hull transducer easily adjusts to hull dead rise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional...

Airmar TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter Cable

TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter CableReplacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount transducer provides anglers with an inexpensive and easy...

Ancor NMEA 2000 90 Elbow Connector

NMEA 2000 90° Elbow ConnectorAncor's NMEA 2000 Approved 90 degree elbow makes cable routing easier. The connector is installed between two cables to reduce stress on the cables and create a compact installation.Features:Color coded for easy installation...

Ancor NMEA 2000 Backbone Cable - 0.5M

NMEA 2000 Backbone Cable - 0.5MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone...

Ancor NMEA 2000 Backbone Cable - 10M

NMEA 2000 Backbone Cable - 10MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone...

Ancor NMEA 2000 Backbone Cable - 2M

NMEA 2000 Backbone Cable - 2MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone...

Ancor NMEA 2000 Backbone Cable - 5M

NMEA 2000 Backbone Cable - 5MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone...

Ancor NMEA 2000 Drop Cable - 0.5M

NMEA 2000 Drop Cable - 0.5MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop...

Ancor NMEA 2000 Drop Cable - 1M

NMEA 2000 Drop Cable - 1MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop...

Ancor NMEA 2000 Drop Cable - 2M

NMEA 2000 Drop Cable - 2MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop...

Ancor NMEA 2000 Drop Cable - 5M

NMEA 2000 Drop Cable - 5MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop...

Ancor NMEA 2000 Dual Device Starter Kit

NMEA 2000 Dual Device Starter KitAncor's NMEA 2000 Starter Kits include all components needed to create a dual device NMEA 2000 network.1 meter power cable with tee, item# 270000Male and female terminators (1 each), item# 270105 and 270106One dual tee...

Ancor NMEA 2000 Female Terminator

NMEA 2000 Female TerminatorAncor's NMEA 2000 Approved Terminators allow for proper termination of an NMEA 2000 network. The yellow couplers connect to the corresponding Ancor tees, creating a simplified, color coded network installation. One male and one...

Ancor NMEA 2000 Four Way Tee Connector

NMEA 2000 Four Way Tee ConnectorAncor's NMEA 2000 Approved Tee Connectors offer connection between NMEA 2000 drop cables and backbone cables. The yellow couplers connect to the corresponding Ancor tees and backbone cables, creating a simplified, color...