RAM Mount 1" Tough-Ball w/ 1/4" -20 x .25" Male Threaded Post

RAM 1" Tough-Ball™ with 1/4" -20 x .25" Male Threaded PostIntroducing the new RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel...

RAM Heavy Duty Electronics Mount w/Short Arm

RAM Mount w/3" x 11" Base & Short ArmsPart #: RAM-E-111U-DThe included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic...

RAM Mount 1" Ball "Light Use" Composite Mount f/Lowrance Elite-4 & Mark-4 Series Fishfinders

1" Ball "Light Use" Composite Mount f/Lowrance Elite-4 & Mark-4 Series FishfindersThe RAP-B-101U-LO11 consists of a composite 2.5" diameter round base with the universal AMPS hole pattern, composite double socket arm and adapter base that inserts...

RAM Mount 1" Ball Standard Length Double Socket Arm w/Medium Tough-Claw Base

1" Ball Standard Length Double Socket Arm w/Medium Tough-Claw™ BaseThe RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails...

RAM Mount 1" Ball w/1/4-20 Stud f/Cameras

RAM 1 Inch Ball with 1/4-20 Stud for Cameras The RAM-B-237U, universal camera and camcorder base consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches most standard camera and camcorder female threads found...

RAM Mount 1" Diameter Ball Mount w/2 Diamond Bases

RAM 1" Diameter Ball Mount w/2 Diamond BasesThe RAM-B-102U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the...

RAM Mount 1" Diameter Ball Mount w/Long Arm & 2 Diamond Bases

RAM 1" Diameter Ball Mount with Long Arm & 2/Diamond BasesThe RAM-B-102U-C consists of a long double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at...

RAM Mount 1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)

1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled...

RAM Mount 1" Diameter Ball Mount w/Short Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)

1" Diameter Ball Mount w/Short Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)The RAM-B-111U-A consists of a short double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains...

RAM Mount 1" Diameter Ball Standard Length Double Socket Arm w/3.25" Diameter Suction Cup Twist Lock Base

RAM 1" Diameter Ball Standard Length Double Socket Arm with 3.25" Diameter Suction Cup Twist Lock BaseThe RAM-B-166-103U consists of a 3.25" suction cup twist lock base, 1" ball diamond base and standard length double socket arm. The suction cup base is...

RAM Mount 1" Tough-Ball w/M6-1X6mm Male Threaded Post

Mount 1" Tough-Ball™ with M6-1X6mm Male Threaded PostRAM Mount's Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows...

RAM Mount 1" x 1" Glare Shield Clamp Base w/1" Ball

RAM 1" x 1" U-Channel Clamp with 1" Ball The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts...

RAM Mount 1" x 2" Rectangle Base w/1" Ball

RAM 1" x 2" Rectangle Base w/1" BallMaterial: Powder Coated Marine Grade Aluminum Color: Black Powder CoatBall Size: 1 inch Rubber Ball Product : RAM MOUNT 1" X 2" RECTANGLE BASE W/ 1" BALL Manufacturer : RAM Mounting Systems Manufacturer Part No :...

RAM Mount 1-1/4" - 1-7/8" Rail Clamp Base w/1.5" Ball

RAM Rail Clamp Base with 1.5" BallThe RAM-271U-12 is a round pipe base that connects to a pipe with a diameter from 1.25" to 1.875". Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball SizeNote: The "U" in the part number reflects...

RAM Mount 1.5" Ball "Rugged Use" Composite Mount f/Lowrance Elite-5 & Mark-5 Series Fishfinders

1.5" Ball "Rugged Use" Composite Mount f/Lowrance Elite-5 & Mark-5 Series FishfindersThe RAP-101U-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the...

RAM Mount 1.5" Ball Adapter f/John Deere

1.5" Ball Adapter for John DeereFeatures:Material: Powder Coated Marine Grade AluminumBall Size: 1.5" Rubber Ball SizeNote: The "U" in the part number reflects product packaged in poly bag.Compatibility: Compatible with the GS2600 & GS2630 John Deere...

RAM Mount 1.5" Tough-Ball w/M6-1 X 6mm Male Threaded Post

1.5" Tough-Ball™ with M6-1 X 6mm Male Threaded PostIntroducing the new RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability...

RAM Mount 1.5" Track Ball w/ T-Bolt Attachment

1.5" Track Ball w/ T-Bolt AttachementDesigned to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick...

RAM Mount 1.5" x 2.5" Rectangle Base w/1.5" Ball

RAM 1.5" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-1525 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated...

RAM Mount 1.5" x 3" Rectange Base w/1" Ball

RAM 1.5" x 3" Rectangle Base w/1" BallThe RAM-B-202U-153 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade...

RAM Mount 1/4"-20 Female Threaded Hex Hole w/1" Ball

RAM 1/4"-20 Female Threaded Hex Hole w/1" BallThe RAM-B-337U includes a 1/4"-20 female thread hex hole connected to a 1" rubber ball. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number...

RAM Mount 100x100mm VESA Plate w/2.25" Ball

100x100mm VESA Plate w/2.25" Ball Square plate features the VESA hole pattern for connection to a wide variety of devicesIncluded D size 2.25" RAM® rubber ball allows for connection to any D size RAM® double socket arm; ball and socket technology allows...

RAM Mount 12" Long Lower Female Tele-Pole

12" Long Lower Female Tele-PoleThe RAM Tele-Pole 12" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill™ and Drill plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX top tele-poles™. The female post is 12"...

RAM Mount 14" Long Extension Pole w/1" and 1.5" Single Open Socket

RAM 14" Long Extension Pole with 1" and 1.5" Single Open SocketsThe RAP-CB-201-14U consists of a SHORT extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees; this allowing for you to rotate your camera adapter in...

RAM Mount 18" Long Lower Female Tele-Pole

RAM 18" Long Lower Female Tele-PoleThe RAM Tele-Pole 18" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill and Drill plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX top tele-poles. The female post is...

RAM Mount 2" Max Width Square Rail Base w/1" Ball

RAM 2" Max Width Square Rail Base with 1" Diameter BallMaterial:Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag. Product : RAM MOUNT 2" MAX WIDTH SQUARE RAIL BASE...

RAM Mount 2" x 2.5" Base w/1" Ball

2" x 2.5" Diameter Base w/1" BallThe RAP-B-202U-225, high strength composite flat surface base, contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base...

RAM Mount 2" x 2.5" Rectangle Base w/1" Ball

RAM 2" x 2.25" Rectangle Base with 1" BallThe RAM-B-202U-225 contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine...

RAM Mount 2" x 3" Rectangle Base w/1" Ball

RAM 2" x 3" Rectangle Base w/1" BallThe RAM-B-202U-23 contains a 1" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade...

RAM Mount 2" x 3" Rectangle Base w/2.25" Ball

2" x 3" Rectangle Base with 2.25" BallContains a 2.25" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base. Product : RAM MOUNT 2" X 3" RECTANGLE BASE W/ 2.25" BALL...

RAM Mount 2" x 4" Rectangle Base w/1" Ball

RAM 2" x 4" Rectangle Base w/1" BallThe RAM-B-202U-24 contains a 1" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade...

RAM Mount 2" x 4" Rectangle Base w/1.5" Ball

RAM 2" x 4" Rectangle Base with 1.5" BallThe RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine...

RAM Mount 2" x 5" Rectangle Base w/2.25" Ball

2" x 5" Rectangle Base with 2.25" BallThe RAM-D-202U-25 consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base.Features:Material: Powder Coated Marine...

RAM Mount 2.5" Composite Round Base w/1" Ball

RAM 2.5" Composite Round Base w/1" BallPart #: RAP-B-202UThe RAP-B-202U contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: High Strength...

RAM Mount 2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" Ball

2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" BallThe RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.Material: High Strength...

RAM Mount 2.5" Max Width Square Rail Base w/1" Diameter Ball

RAM 2.5" Max Width Square Rail Base w/1" Diameter BallMaterial:Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag. Product : RAM MOUNT 2.5" MAX WIDTH SQUARE BASE RAIL...

RAM Mount 2.5" Triple Magnetic Base Adapter

RAM Triple Magnetic Base AdapterOne of the latest additions to the RAM product line is a new magnetic base. This simple adapter mates to your new or existing mount that has a RAM-B-202U base with ball. Once attached, you have a mount that will hold firm...

RAM Mount 2008 Fishing Rod Holder w/o Base

RAM Tube 2008 Fishing Rod Holder - No BallPart #: RAP-119NBColor: BlackMaterial: High Strength CompositeBall Size: 1.5" Rubber Ball Product : RAM MOUNT 2008 FISHING ROD HOLDER W/O BASE Manufacturer : RAM Mounting Systems Manufacturer Part No :...

RAM Mount 3" Suction Cup Base w/1" Plastic Ball

RAM 3" Diameter Suction Cup w/1" Plastic BallPart #: RAP-B224-2UColor: BlackBall Size: 1" Material:: High Strength Composite Product : RAM MOUNT 3" SUCTION CUP BASE W/ 1" PLASTIC BALL Manufacturer : RAM Mounting Systems Manufacturer Part No :...

RAM Mount 3.3" Suction Cup Base w/Twist Lock

RAM 3.3" Diameter Suction Cup Base with Twist Lock The RAP-224-1U, suction cup twist lock base contains a standard RAM double hole diamond shaped end. The 3.3" diameter suction cup is designed to have an extra strong hold on any smooth non-porous...

RAM Mount 3.68" Round Base w/3-3/8" E Size Ball

RAM 3.68" Diameter Base w/3-3/8" BallPart #: RAM-E-202UThe RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180...

RAM Mount 4" Long Top Male Tele-Pole

RAM 4" Long Top Male Tele-PoleThe RAM upper Tele-Pole, 4" male pole, contains a swing arm connection point that will attach directly to any double swing arm system with 1.5" Socket. The male post is 4" long and has a diameter of 1.328". Material: Powder...

Ram Mount 5" Extruded Aluminum Tough-Track

5" Extruded Aluminum Tough-Track™With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any...

RAM Mount 50mm x 100mm Half VESA Plate Adapter w/D Size 2.25" Ball

50mm x 100mm Half VESA Plate Adapter with D Size 2.25" BallThe RAM-D-243U consists of a 2.25" diameter rubber ball, connected at right angles to a square 2.81" x 5" plate.Features:Material: Powder Coated Marine Grade AluminumBall Size: 2.25" Rubber Ball...

RAM Mount 6.25" x 2" Composite Base Plate w/1.5" Ball

The RAP-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including...

RAM Mount 7" Long Lower Female Tele-Pole

RAM 7" Long Lower Female Tele-PoleThe RAM Tele-Pole 7" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill and Drill plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX top tele-poles. The female post is 7"...

RAM Mount 75mm x 75mm VESA 3.625" Plate w/2.25" D Size Ball

RAM 75mm x 75mm VESA 3.625" Plate w/ 2.25" Diameter BallThis RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material:...

Ram Mount 9" Extruded Aluminum Tough-Track

9" Extruded Aluminum Tough-Track™With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any...